Strong Start to Maiden Drill Program at Oasis
Released
Released
Announcement PDF
ASX Release 27 August 2025
MAIDEN DRILL PROGRAM MAKES STRONG PROGRESS AT
OASIS URANIUM PROJECT
Highlights
Greenvale’s maiden drill program at Oasis nearly two-thirds complete,
with ~1,000m of drilling completed to date, across seven drill-holes.
Five holes still to be drilled, with the overall program expected to be
completed by early-to-mid September.
Spectral gamma logging and Acoustic Televiewer (ATV) imaging has
been conducted on the first seven holes, with the results currently
being interpreted.
Drilling has successfully tested strike and depth extensions of the
known mineralisation at the Oasis deposit.
Initial assay results are expected to be released together with the first
batch of spectral gamma logging results due imminently.
Greenvale Energy Limited ASX: GRV (“Greenvale” or “the Company”) is pleased to provide an
update on the current drilling program at the Company’s 100%-owned Oasis Uranium Project in
Queensland, Australia.
The Program began on 22 July 2025 with the clearing of access tracks and drill pads, with drilling
commencing on 27 July 2025.
As at the end of shift on 22 August, the Company has completed seven drill holes for a total of
approximately 1,000m of combined Reverse Circulation (RC) and Diamond Core (Core) drilling.
A further five drill holes are planned to complete the program.
Greenvale CEO Alex Cheeseman said:
“Our maiden drill program at Oasis had three key goals – to confirm historical drilling data, to
extend the known mineralisation at depth and to extend known mineralisation along strike. With
the program now well advanced, we are very pleased with how things have progressed.
“Operationally, the drilling has gone to plan and is being conducted in a safe and efficient
manner. Spectral gamma logging and ATV surveying of the first seven diamond holes
Interactive Investor Hub - Engage directly with the Company through our Investor hub, you can ask questions, review
comments and get direct access to the Company – follow the link greenvaleenergy.com.au/announcements
Greenvale Energy Limited
ABN 54000743555
Perth: Level 1, 1 Alvan St, Subiaco, 6008
W: greenvaleenergy.com
E: admin@greenvaleenergy.com.au
Brisbane: Suite 5-Level 12, 10 Market St, Brisbane 4000
Page | 1
Greenvale Energy Limited ASX Release
commenced last week and samples from the first drill hole have been sent to the laboratory in
Adelaide for chemical analysis.
“We will use the assay results from the first hole to help calibrate the data being generated by the
spectral gamma logging. We expect to have this information to hand for release to market within
the next 1-2 weeks.
“The remainder of the drill program will continue to test the northern extent of the mineralised
structure and also lateral extensions at depth, we look forward to keeping the market updated
with our progress.
“On other fronts, we have received encouraging results from recently completed reconnaissance
mapping and fieldwork designed to confirm regional extensions to the Oasis deposit, with strong
indications of surface uranium from rock chip sampling 4.5km to the north-east.”
Oasis Maiden Drill Program
Greenvale’s maiden drill program at the Oasis Uranium Project was designed to confirm the
historical drill results and test for extensions of the mineralisation both at depth and along strike.
Drill holes 25GRV01 and 25GRV02 were designed to provide confirmatory data with which to
validate historical drilling. Samples from these holes are currently with Intertek Laboratories.
Drill hole 25GRV03 was designed to test mineralisation at depth. Drill holes 25GRV04 and
25GRV05 were designed to test for extensions of the deposit to the south, while drill holes
25GRV06 and 25GRV07 were designed to test for extensions of the deposit to the north. A plan
map with collar locations of completed and planned drillholes can be seen in Figure 1.
Core from drill holes 25GRV04, 25GRV05, 25GRV06 and 25GRV07 have been logged and is
currently being transported to Townsville for cutting, sampling and dispatch to Intertek.
Drilling operations have progressed smoothly under generally good ground conditions, with
activities carried out efficiently and without interruption.
No safety incidents have been recorded, reflecting the team’s strong focus on planning,
compliance and safe work practices. Radiation monitoring is ongoing throughout the program,
with regular checks confirming dosage rates are low and well within expected parameters.
Remaining Program of Work
The remaining drillholes in the program are designed to further test the extent of the deposit.
Drillhole 25GRV08 is planned to target a northernmost extension, stepping out beyond 25GRV07
to test the continuation of mineralisation further along strike.
Drill-holes 25GRV09 and 25GRV10 are designed to confirm the continuity of mineralisation and
improve the overall geological model.
Drill-holes 25GRV11 and 25GRV12 will test deeper positions beneath known mineralisation,
assessing the potential for additional mineralisation at depth.
Page | 2
Greenvale Energy Limited ASX Release
Figure 1. Collar map of completed and pending drill holes
Down-hole logging commenced on 21 August 2025 and incorporates both spectral gamma and
Acoustic Televiewer (ATV) tools to provide detailed, real-time insights into the sub-surface
geology. Spectral gamma logging will differentiate between uranium, thorium, and potassium,
while ATV imaging will capture structural features such as fractures and bedding orientation.
Together, these methods offer a rapid, cost-effective assessment of the depth, thickness and
concentration of the uranium mineralisation.
Samples for each drill hole will be sent to Intertek for assay, with assays currently pending for
drill-holes 25GRV01 and 25GRV02.
Page | 3
Greenvale Energy Limited ASX Release
Regional Extensions to Oasis
Reconnaissance mapping and sampling was completed in June 2025, across regional
radiometric and aeromagnetic geophysical targets surrounding the Oasis deposit. The aim of this
initial field program was to assess the broader potential of the project area.
A total of 33 rockchip samples were collected and submitted for assay, of which 16 samples
returned grades greater than 10ppm U, and 5 samples greater than 30ppm U, from various
granite outcrops. The key notable result from the program was sample 3016815, which returned
187.4ppm uranium within a diorite dyke representing a strong indication of uranium
mineralisation outside the immediate Oasis deposit area. Full details of the sampling program
including JORC Code 2012 Table 1, Section 1 and Section 2 can be seen at Appendix 1.
This result has already been followed up with additional sampling to verify and better define the
anomaly. The sample is located approximately 4.5km to the NE of the Oasis deposit. The
occurrence of elevated uranium at this distance from known mineralisation suggests the
potential for a broader mineralised system.
Authorised for release
This announcement has been approved for release by the Board of Directors.
For further information please contact
Alex Cheeseman
CEO
E: admin@greenvaleenergy.com.au
Nicholas Read
Read Corporate
E: nicholas@readcorporate.com.au
M: +61(0)419 929 046
About Greenvale Energy Limited Greenvale is an ASX-listed exploration company with a portfolio of
projects that will support a sustainable, low-carbon future. The Company has early-stage uranium
exploration projects in the Northern Territory, the Oasis advanced-exploration project in Queensland and
the Alpha Torbanite and Geothermal projects in Queensland. The Company believes the best way to create
long-term shareholder value is by investing in exploration, to make discoveries and grow its resource-base.
Forward Looking Statements This announcement may contain certain forward-looking statements
and projections. Such forward looking statements/projections are estimates for discussion purposes only
and should not be relied upon. Forward looking statements/projections are inherently uncertain and may
therefore differ materially from results ultimately achieved. The Company does not make any
representations and provides no warranties concerning the accuracy of the projections and disclaims any
obligation to update or revise any forward-looking statements/projects based on new information, future
events or otherwise except to the extent required by applicable laws. While the information contained in
this report has been prepared in good faith, neither the Company nor any of its directors, officers, agents,
employees or advisors give any representation or warranty, express or implied, as to the fairness,
accuracy, completeness or correctness of the information, opinions and conclusions contained in this
announcement.
Competent Persons Statement The information in this announcement that relates to exploration
results is based on information compiled by Dr. Simon Beams who is a Member of AusIMM (Member
#107121) and a Member of the Australian Institute of Geoscientists (Member # 2689). Dr Beams is a fulltime employee of Terra Search Pty Ltd and has sufficient experience which is relevant to the style of
mineralisation under consideration to qualify as a Competent Person as defined in the 2012 Edition of the
“Australian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Dr Beams
consents to the inclusion in the announcement of the matters based on his information in the form and
context in which it appears.
Page | 4
Greenvale Energy Limited ASX Release
Appendix 1 – Detailed Exploration Results
Table A1 – Rock chip coordinate, geology and assay results from 4 acid digest ICP – MS analysis (detection limit for uranium = 0.01 ppm U)
Sample
Data_Type
MGA_N
MGA_E
Background CPS
Outcrop CPS
U ppm
Lithological Description
3016803
RC
7918668
229130
435
435
0.44
Potassic Altered weathered Micro Granite
3016804
RC
7918523
229018
600
590
0.05
Bucky Euhedral Quartz float/ Some KSpar Alt.
3016805
RC
7919773
231646
675
675
4.78
K-Spar Biotite coarse grained granite
3016806
RC
7919625
231826
700
815
10.98
K-Spar Biotite coarse grained granite
3016807
RC
7920028
231995
750
950
6.7
K-Spar Biotite coarse grained granite
3016808
RC
7919978
232640
820
920
5.4
K-Spar Biotite coarse grained granite
3016809
RC
7919882
232576
525
625
3.12
K-Spar Biotite medium grained granite
3016810
RC
7919270
232909
620
620
4.06
Micro- Granite/ K-spar rich?
3016811
RC
7921870
233009
650
650
11.33
K-Spar Biotite coarse grained granite
3016812
RC
7921787
232836
400
350
6.82
Epidote-K-Spar fine grained sandstone
3016813
RC
7921782
232872
800
750
3.32
Quartz Biotite magnetite
3016814
RC
7921617
232838
550
650
4.09
K-Spar Biotite coarse grained granite
3016815
RC
7922697
233103
300
200
187.38
Diorite Dyke
3016816
RC
7918739
233085
600
700
23.44
K-Spar Biotite coarse grained granite
3016817
RC
7918986
233142
540
700
11.4
Mica rich Granite
3016818
RC
7918826
233194
625
800
30.18
K-Spar rich granite
3016819
RC
7918814
233184
650
1100
0.42
K-Spar rich coarse grained granite
Ultra coarse grained K-Spar Biotite
Granite
Bleached and altered sandstoneQuartzite
3016821
RC
7916062
232902
775
1450
47.51
3016822
RC
7916023
232915
300
300
6.37
3016823
RC
7915972
232818
600
700
11.68
Biotite Schist
3016824
RC
7915975
232831
800
1300
31.09
Biotite rich Coarse Grained Granite
3016825
RC
7915409
232355
1150
1250
22.15
Biotite rich Coarse Grained Granite
3016826
RC
7915849
232719
550
850
23.44
Biotite rich Coarse Grained Granite
3016827
RC
7915700
232828
350
350
1.54
Folded meta - sediments
3016828
RC
7915580
232707
900
1025
16.48
Biotite Altered fine grained Granite
Page | 5
Greenvale Energy Limited ASX Release
Sample
Data_Type
MGA_N
MGA_E
Background CPS
Outcrop CPS
U ppm
3016829
RC
7915496
232711
1000
1275
39.34
Lithological Description
Heavily Altered Biotite Granite
Possible Tonalite with amphibole
selvedges
Biotite k-Feldspar granite Medium
Grained/ Biotite alteration of granite
3016830
RC
7915497
231825
200
200
5.61
3016831
RC
7913265
230324
650
900
6
3016832
RC
7913277
230196
600
1050
69.74
Biotite rich Coarse Grained Granite
3016833
RC
7910386
236087
180
280
13.05
Altered Meta-seds/ Amphibole rich
3016834
RC
7910307
236031
130
130
1.08
Tonalite or Pegmatite
3016835
RC
7910380
235673
200
270
15.73
Fine grained meta - seds with Amphibole
and garnet
3016836
RC
7911176
235711
175
200
7.61
Meta - sed with Amphibole
JORC Code, 2012 Edition Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
techniques
•
•
•
•
Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public
Report.
In cases where ‘industry standard’ work has been done this would be relatively
simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual commodities or mineralisation
types (eg submarine nodules) may warrant disclosure of detailed information.
Commentary
Rock chip samples were taken from outcropping or shallowly subcropping
rocks using a geopick.
Sample locations were determined based on follow up of airborne
radiometric anomalies . In general , samples were taken of rock and
surface material that returned ground-based, total count, radiometric
readings > greater than 200cps (counts per second) on a handheld
scintillometer.
Drill samples were taken from the core section of diamond drill holes, precollared with Reverse Circulation percussion drilling (RC) Triple tube HQ
diamond drilling was utilized , Half core samples were collected on a 1m
basis. Samples were photographed, half-cored, and despatched to an
external lab by an external contractor.
Page | 6
Greenvale Energy Limited ASX Release
Criteria
JORC Code explanation
Drilling
techniques
•
Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other type, whether core is oriented
and if so, by what method, etc).
6 core holes were drilled at -60°, and 1 drilled at -80° from surface using
reverse circulation drilling until core point was reached. Then HQ drilling
methods employed, using triple tube chrome barrel and orientation tool.
Hole depths ranged from 300.88m to 66.33m
Drill sample
recovery
•
Method of recording and assessing core and chip sample recoveries and results
assessed.
Measures taken to maximise sample recovery and ensure representative nature
of the samples.
Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse
material.
Chip samples were collected at approximately 1 m intervals.
All chip samples were geologically logged and photographed.
All drill samples were collected and stored in sample trays at Terra Search
storage facility.
Core recovery was recorded for all drill runs and documented in a
Geotechnical log. The Triple Tube technology and procedure ensured core
recoveries were excellent throughout the hole.
Core was marked up in metre lengths and reconciled with drillers core
blocks. An orientation line was drawn on the core. Core sampling was
undertaken by an experienced operator who ensured that half core was
sawn up
with one side consistently sent for analysis and the other side was
consistently retained for archive purposes. The orientation line was
consistently preserved.
An unbiased, consistent half core section was submitted for the entire
hole, on the basis of continuous 1m sampling. The entire half core section
was crushed at the lab and then split. The representative subsample was
then fine ground and a representative unbiased sample was extracted for
further analysis.
Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the relevant intersections logged.
Chip samples were collected every metre, geologically logged and
photographed.
All core was collected, measured, geologically logged and photographed.
Geological logging was carried out by well-trained/experienced geologist
and data entered via a well-developed logging system designed to capture
descriptive geology, coded geology and quantifiable geology. All logs were
checked for consistency by the Principal Geologist. Data captured through
Excel spread sheets and Explorer 3 Relational Data Base Management
System. A geotechnical log was prepared.
Logging was qualitative in nature. A detailed log was described on the
basis of visual observations. A comprehensive Core photograph catalogue
•
•
Logging
•
•
•
Commentary
Page | 7
Greenvale Energy Limited ASX Release
Criteria
JORC Code explanation
Commentary
was completed with full core dry, full core wet and half core wet photos
taken of all core.
The entire length of all drill holes has been geologically logged.
Sub-sampling
techniques and
sample
preparation
•
•
•
•
•
•
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled
wet or dry.
For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size of the material being
sampled.
Half core samples were sawn up on a diamond saw on a metre basis for
HQ at Terra Search facility in Townsville, QLD and submitted to Intertek
Adelaide for preparation and analysis.
RC samples were riffle split after passing through a Rig attached cyclone at
site. Approximately 3kg of representative RC sample weas collected on 1m
basis for possible future analysis.
The above techniques are considered to be of a high quality, and
appropriate for the nature of mineralisation anticipated.
Radiometric data is collected every metre of the RC and core holes to be
checked and correlated against any lab data for U,Th,K. Similarly portable
XRF (PXRF) data is collected at a 1m basis from RC bulk sample and
from3m drill cuttings (sludge samples) from the core sections. The latter
sampling provides a qualitative check on U,Th,K contents on a broader 3m
scale. In addition down hole radiometric probe data will provide additional
validation of the appropriateness of sample size .
The standard 2kg -5kg sample is more than appropriate for the grainsize of
the rock-types and the sub-microscopic uranium minerals and sulphide
grainsize. The sample sizes are considered to be appropriate to represent
the style of the mineralisation, the thickness and consistency of the
intersections.
Quality of assay
data and
laboratory tests
•
•
•
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether acceptable levels of accuracy (ie lack
of bias) and precision have been established.
Preparation of rock chip samples involves crushing splitting and grinding at
Intertek/Genalysis lab, Townsville. The total amount of economic metals
and pathfinder elements tied up in sulphides and oxides such as U, Th, Cu,
Pb, Zn, Ag, As, Mo, Bi, S is captured by the 4-acid digest method ICP
finish. Mass spectrometry (MS) ensures low level detection and REE are
also captured. This is regarded as a total digest method and is checked
against QA-QC procedures which also employ these total digestion
techniques. Major elements which are present in silicates, such as K, Ca,
Fe, Ti, Al, Mg are also digested by the 4-acid digest Total method.
Page | 8
Greenvale Energy Limited ASX Release
Criteria
JORC Code explanation
Commentary
The techniques are considered to be entirely appropriate for a schistose ,
micaceous mineralized structure such as the Oasis deposit, hosted
primarily in a granitic / metamorphic terrane.
The economically important elements in these deposits are contained in
both resistate minerals and sulphides which are almost entirely liberated
by 4-acid digest, All gold is determined with a classic fire assay. Samples
were assayed for gold using the 50g fire assay method.
The primary assay method used is designed to measure the total gold in the
sample as per classic fire assay.
Magnetic susceptibility measurements utilizing Exploranium KT10
instrument, zeroed between each measurement and using known reference
materials to check readings.
Total count radiometric measurements utilizing Exploranium GR10
Scintillometer, regularly checked against a certified standard with known
counts per second readings. Measurements taken singly with sample
physically removed from adjacent sample. 3 spot measurements per metre
of core.
PXRF analysis has been utilized to provide multi-element data for the
prospect. Dried sludge samples are considered appropriate and
representative samples to provide preliminary chemical analysis to guide
exploration targeting, providing the shortcomings of the nature of these
samples is taken into consideration. The latter applies in particular to
drilling additives, muds, wear and tear on the drill string etc.
PXRF Analysis is carried out in a controlled environment in air conditioned
Terra Search offices in Townsville or a mobile enclosed office on site.. The
instrument used is Terra Search’s portable Niton XRF analyser (Niton
‘trugeo’ analytical mode) analysing for a suite of 40 major and minor
elements. in.
The PXRF equipment is set up on a bench and the sub-sample (loose
powder in a thin clear plastic freezer bag) is placed in a lead-lined stand. An
internal detector autocalibrates the portable machine, and Terra Search
standard practice is to instigate recalibration of the equipment every 2 to 3
hours.
Page | 9
Greenvale Energy Limited ASX Release
Criteria
JORC Code explanation
Commentary
Readings are undertaken for 60 seconds on a circular area of approximately
1cm diameter. A higher number of measurements are taken from the centre
of the circle and decreasing outwards.
PXRF measures total concentration of particular elements in the sample.
Reading of the X-Ray spectra is effected by interferences between different
elements. The matrix of the sample eg iron content has to be taken into
account when interpreting the spectra.
The reliability and accuracy of the PXRF results are checked regularly by
reference to known standards. There are some known interferences
relevant to particular elements eg W & Au; Th & Bi, Fe & Co. Awareness of
these interferences is taken into account when assessing the results.
Rock Chips were analysed using the following methods, Au by FA50/OE04
and RE: FP6/MS33
Drill hole assays are pending.
QAQC samples are monitored on a batch‐by‐batch basis, Terra Search has
well-established sampling protocols including the insertion of blanks (both
coarse & pulped), certified reference material (CRM standards). Terra
Search quality control included determinations on certified OREAS
samples interspersed at regular intervals through the sample suite of the
commercial laboratory batch.
Assay quality was monitored using pulp blanks, as well as certified
reference materials (CRMs) at a range of uranium grades. Pulp blank
results indicated no material contamination of samples from sample
preparation or during the analytical process. CRM results were within 3
standard deviations of certified values. No material systematic bias nor
other accuracy related issues were identified.
Standards are checked on receipt of results. The rockchip results that
have been returned to date are found to be within acceptable tolerances.
Laboratory assay results for these quality control samples are within 5% of
accepted values.
Verification of
sampling and
assaying
•
•
•
The verification of significant intersections by either independent or alternative
company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data verification, data
Sample intervals to be assigned a unique sample identification number
prior to sample despatch
Significant intersections are verified by Terra Search Pty Ltd, independent
geological consultants who geologically supervised the drilling. Validation
Page | 10
Greenvale Energy Limited ASX Release
Criteria
JORC Code explanation
•
storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Commentary
is checked by comparing assay results with logged mineralogical intervals
that are diagnostic of the mineralization eg chlorite schist, with quartz
veins, minor sulphide and accompanied by high radiometric counts. These
intervals have a close correlation historically with high U grades.
Although holes have not been directly twinned , the holes drilled by GRV to
date pass close to earlier drill holes , logged geology and radiometric
anomalism is entirely consisted with previous results. Lab assay results
from recent drilling are awaited.
Data is collected by qualified geologists and experienced field technicians
and entered into excel spreadsheets.
Data is imported into database tables from the Excel spreadsheets with
validation checks set on different fields. Data is then checked thoroughly by
the Operations Geologist for errors. Accuracy of rock chip data is then
validated when imported into MapInfo.
Location and analysis data are then collated into a single Excel
spreadsheet.
Data is stored on servers in The Company’s office (GRV) and also with
Terra Search Consultants. There are regular backups and archival copies
of the database made. Data is validated by long-standing procedures
within Excel Spreadsheets and Explorer 3 database and spatially validated
within MapInfo GIS.
No adjustments are made to the Commercial lab assay data. Data is
imported into the database in its original raw format.
Location of data
points
•
•
•
Data spacing
and distribution
•
•
Accuracy and quality of surveys used to locate drill holes (collar and down-hole
surveys), trenches, mine workings and other locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Collar location information and rock chip sample location was originally
collected with a Garmin 76 hand held GPS.
X-Y accuracy is estimated at 3-5m, whereas height is +/- 10m.Coordinates
have been reassessed with DGPS, Accuracy is sub 0.5m in X,Y,Z.
Down hole surveys were conducted on all holes using a Reflex Gyro .
Surveys were generally taken every 30m downhole , dip, magnetic azimuth
were recorded.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore
Reserve estimation procedure(s) and classifications applied.
At the Oasis prospect, previous drilling program drill spacing between
section lines is tight in the orer of 25m or so spaced diamond core , RC
percussion , and open hole percussion holes. Holes have been drilled in
fences along section lines with collars generally 50m or less apart.
Page | 11
Greenvale Energy Limited ASX Release
Criteria
JORC Code explanation
•
Whether sample compositing has been applied.
Commentary
Variously positioned over an area of 200m x 200m. Down hole sample
spacing is in the order of 1m which is entirely appropriate for the style of
the deposit and sampling procedures.
No sample compositing has been applied, All GRV sampling is of 1m
downhole samples of half core.
Orientation of
data in relation
to geological
structure
•
•
Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
Geological control of the Oasis structure containing uranium
mineralisation is very well established from previous historical work dating
back to the 1970’s with Esso, followed up in 2008 with modern exploration
by Glengarry and Mega Uranium. The Oasis Uraniferous structure is
broadly north – south striking and dipping 60 to 70 degrees to the west.
This structural att
Share your feedback
Discover