Further high grade assays and second structure
Released
Released
Announcement PDF
ASX Release 12 November 2025
Interactive Investor Hub - Engage directly with the Company through our Investor hub, you can ask questions, review
comments and get direct access to the Company – follow the link greenvaleenergy.com.au/announcements
Greenvale Energy Limited ABN 54000743555 W: greenvaleenergy.com E: admin@greenvaleenergy.com.au
Perth: Level 1, 1 Alvan St, Subiaco, 6008 Brisbane: Suite 5-Level 12, 10 Market St, Brisbane 4000 Page | 1
OASIS DELIVERS FURTHER HIGH-GRADE URANIUM ASSAYS
AS TRENCHING PROGRAM DISCOVERS POTENTIAL SECOND
MINERALISED STRUCTURE
Greenvale Energy Limited ASX: GRV (“Greenvale” or “the Company”) is pleased to report
chemical assay results from a further four diamond drill-holes completed recently at the Oasis
Uranium Project in Queensland. The results continue to strengthen the geological model by
confirming continuity of the known high-grade mineralisation both along strike and down-dip.
In addition to the drilling assays, a trenching program that commenced at Oasis at the end of
October 2025 has also been progressing well, with six of the original nine approved trenches now
complete. Samples collected from each trench will be sent for independent analysis.
A flexible approach has been taken to the excavation of each trench, allowing the Company to
optimise the areas of sampling and deliver the most time and capital efficient program possible.
The results from the trenching program are expected to generate the next round of high-
confidence drill targets at Oasis. Detailed exploration results are provided in Appendix 1, 2 and
3.
Highlights
Chemical assay results received for drill-holes 25GRV003 – 25GRV006, confirming the
continuity of high-grade uranium mineralisation along strike and down-dip of the
main mineralised shear zone at Oasis.
Headline results include:
- 5.50m @ 722ppm U3O8 from 279m (25GRV003), including:
2m @ 1,189ppm U3O8 from 279m;
- 3.75m @ 1,001ppm U3O8 from 76.25m (25GRV004), including:
1m @ 2,424ppm U3O8 from 78m; and
- 3.50m @ 355ppm U3O8 from 88m (25GRV006), including:
2m @ 592ppm U3O8 from 88.5m.
Remaining drill-hole assays expected by the end of November 2025.
An ongoing trenching program is progressing well, with six trenches completed and
strong indications of a second, northeast-trending mineralised structure from trench-
wall scintillometer results.
Samples from the trenching program are currently being prepared for dispatch for
chemical assay, with field-based scintillometer readings returning peak values of
more than 2,000 cps.
All results to date point to a significant expansion of the Oasis geological model.
Greenvale Energy Limited ASX Release
Page | 2
Greenvale CEO Alex Cheeseman said:
“We’re continuing to build a compelling picture of the exploration potential at Oasis, with these
latest high-grade chemical assay results confirming the continuity of the deposit, and our
concurrent trenching program providing excellent insights into the structure and controls on the
uranium mineralisation across a broader area.
“Although preliminary, the results from the trenching program so far reinforce our belief that there
may be additional mineralised structures within the Oasis Shear that are yet to be discovered.
“Importantly this detailed knowledge at Oasis, which combines multiple exploration techniques
and datasets, establishes a strong pathway for our expanded regional exploration efforts
surrounding the Oasis deposit. The prospect of discovering multiple Oasis-like deposits across
our tenement provides Greenvale with an opportunity to build significant scale as we remain on
the hunt to make a word-class discovery.”
Oasis Project Overview
The Oasis Uranium Project (EPM 27565) covers an area of 90km² in North Queensland,
approximately 300km west of Townsville and entirely within the Lynd Station pastoral lease (refer
to Figure 1).
Greenvale’s 2025 maiden drill program was conducted between July and September 2025,
designed to validate historical exploration results, test for extensions to mineralisation both at
depth and along strike, and to help build geological understanding of the deposit, seeking to
apply the same understanding to broader regional targets within EPM 275651
.
Figure 1 – Project Location Map – Oasis Deposit, EPM27565.
1
Refer to ASX Announcement Oasis Uranium Prospectivity Report released 02 October 2025
Greenvale Energy Limited ASX Release
Page | 3
New Chemical Assay Results
Chemical assays have been received for holes 25GRV003, 25GRV004, 25GRV005 and 25GRV006
and are reported in this announcement. Details of the holes drilled and their respective
significant intercepts are provided in full in Appendix 1 – Tables 1 and 2.
Historically, the uranium mineralisation was found to be hosted in structurally controlled,
deformed granite intrusives and high-grade metamorphics, with the main Oasis Shear striking
north-south, dipping 60-70° west, and showing similarities to an alaskite-style uranium deposit.
The 2025 drilling program has confirmed this geological model, revealing the host to
mineralisation to be the same chlorite-biotite schist unit that forms the contact between the
granite and granitic gneiss. This contact is both a structural and metamorphic contact, with the
granite and gneiss units currently believed to be part of the system sourcing the uranium and the
cross-cutting structures correlating with logged mafic intrusives that may be responsible for
mobilising uranium-rich fluids out of the granites and into the structural zones.
Chemical assays from the initial holes, 25GRV001 and 25GRV002, supported this initial theory.
This was further strengthened by the results from hole 25GRV003, with the collar situated
approximately 70m west of hole 25GRV002 and testing deeper extensions, down-dip of the
mineralised shear as shown in Figure 2 and Figure 3.
Holes 25GRV004 and 25GRV006, situated along strike to the south and north respectively,
appear to be slightly different, with mineralisation hosted within mafic dykes intruding into the
surrounding granite. This further supports the model that the intrusives might be the energy driver
behind mobilising uranium from within the granites, while also presenting additional structural
zones with the right chemical environment into which uranium can precipitate.
Mineralisation intersected by hole 25GRV005 was of lower grade, returning an intercept of 0.5m
@ 190.78ppm U3O8, however this still shows that there is uranium in the system at the southern
end of the currently-known deposit (Figure 2).
The lenses intersected in the Oasis Shear are observed to be of variable thickness, indicating that
potential remains for both interval thickness and grade to increase again beyond hole 25GRV005
and continue southwards. This thinking was instrumental in the design of the southern-most
trenches.
Trenching Program Near Completion
A trench sampling program commenced at Oasis at the end of October 2025 and is now nearing
completion, with six trenches excavated, mapped and sampled.
The original planned trenching program consisted of nine trench lines. Prior to excavation, each
trench line was surveyed at surface with a hand-held scintillometer. Preliminary readings
indicated background values of between 200 and 350 counts per second (cps) over the western
areas of the deposit, with values significantly increasing in places to more than 2,000 cps
towards the eastern parts of the main shear zone.
The drop in surface scintillometer counts towards the west indicates that mineralisation is much
deeper, does not have an expression at surface and that all radiometric response is masked by
overlying cover sediments. This matches observations from the drilling (e.g., hole 25GRV003),
which shows the steep, westerly-dipping orientation of the mineralised shear.
These field observations led to the current trench excavation process whereby, instead of rigidly
sticking to the original planned lines, the field scintillometer readings were used to slightly adjust
Greenvale Energy Limited ASX Release
Page | 4
the position and length of each trench. This flexible and dynamic approach has resulted in the
discovery of a second, potentially mineralised NE-trending structure which correlates well with
the interpreted structural feature from the recent ground magnetics survey, and could be a fault
splay coming off, or into, the Oasis Shear.
Figures 4 and 5 present this more clearly, with the scintillometer survey results from trenches
T01 – T04 plotted as coloured spheres, overlying the close-spaced ground magnetics image (RTP
1VD), and the white line in the middle of the 2025 drilling area (Figure 4) representing the
currently-interpreted plane of mineralisation in the main Oasis Deposit. Results from trenches
T05 and T06 are currently being processed in the field and will be reported when available.
Figure 2 – The newly expanded mineralised envelope based on the 2025 drilling at Oasis.
Greenvale Energy Limited ASX Release
Page | 5
Figure 3 – Revised cross-section through holes 25GRV001 – 25GRV0032
with newly-received
chemical assays from 25GRV003 confirming open mineralisation at depth, down-dip of the
main Oasis Shear.
2
Refer to ASX Announcement High-Grade Uranium from drilling at Oasis released 04 September 2025
Greenvale Energy Limited ASX Release
Page | 6
In addition to the samples, radiometric, geological and structural data are also being collected
from each trench. This new information will be critical to improving the deposit-scale geological
model, further strengthening the systems-style exploration strategy which will be utilised in
future regional exploration work in areas surrounding the Oasis Deposit.
Once all of the required samples and data have been collected from the trenches, each trench is
backfilled and rehabilitated, along with all of the 2025 drill sites.
Figure 4 – Field scintillometer readings from trenches T01 – T04, overlain on the original
trench plan, and recent ground magnetics (RTP 1VD).
Greenvale Energy Limited ASX Release
Page | 7
Figure 5 – Oblique section looking north-east through the Oasis Uranium Deposit (100m-
wide section window, capturing scintillometer results of trench T04).
Next Stage of Work
Chemical assays from the final six drill-holes are currently being processed by Intertek, with
results expected by the end of November. The ongoing trenching program is on track for
completion by the middle of November, keeping within schedule and budget. The results from
the trenching program are expected 6-8 weeks after the program concludes.
Analysis of all data from the drilling and trenching program will be used to generate the next round
of drilling target at Oasis. The Company may look to conduct initial reconnaissance exploration
at regional targets to generate further drill targets for testing as a priority in the next quarter.
Authorised for release
This announcement has been approved for release by the Board of Directors.
For further information please contact
Alex Cheeseman Nicholas Read
CEO Read Corporate
E: admin@greenvaleenergy.com.au E: nicholas@readcorporate.com.au
M: +61(0)419 929 046
Greenvale Energy Limited ASX Release
Page | 8
About Greenvale Energy Limited
Greenvale is an ASX-listed exploration company with a portfolio of projects that will support a sustainable,
low-carbon future. The Company has greenfield, uranium exploration projects in the Northern Territory,
the high-grade Oasis Uranium project in Queensland and the Alpha Torbanite project in Queensland. The
Company believes the best way to create long-term shareholder value is by investing in exploration, to
make discoveries and grow its resource-base.
Forward Looking Statements
This announcement may contain certain forward-looking statements and projections. Such forward
looking statements/projections are estimates for discussion purposes only and should not be relied upon.
Forward looking statements/projections are inherently uncertain and may therefore differ materially from
results ultimately achieved. The Company does not make any representations and provides no warranties
concerning the accuracy of the projections and disclaims any obligation to update or revise any forward-
looking statements/projects based on new information, future events or otherwise except to the extent
required by applicable laws. While the information contained in this report hasbeenprepared in good faith,
neither the Company nor any of its directors, officers, agents, employees or advisors give any
representation or warranty, express or implied, as to the fairness, accuracy, completeness or correctness
of the information, opinions and conclusions contained in this announcement.
Competent Persons Statement
The information in this announcement, as it relates to exploration results, interpretations and conclusions,
is based on information reviewed by Ms Asha Rao who is Technical Advisor & Competent Person to
Greenvale Energy Ltd and is a Member of both the Australasian Institute of Mining and Metallurgy (AusIMM,
#228188) and the Australian Institute of Geoscientists (AIG, #6925). Ms Rao is a Consultant to the
Company, and has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration, and to the overseeing of activities being undertaken to qualify as a Competent Person
(as defined in the JORC 2012 edition of the “Australasian Code for Reporting of Mineral Resources and Ore
Reserves”. Ms Rao consents to the inclusion of this information in the form and context in which it appears.
Greenvale Energy Limited ASX Release
Page | 9
Appendix 1 – Drillhole Collars
Hole ID
Easting_
MGA
Z55
Northing_MGA
Z55
RL_m
Mag
Azi (°)
True
Azi (°)
Inc
(°)
TD_m Status
25GRV01 230699 7918841 534.975 91 98.5 -61 63.7 Drilled
25GRV02 230661 7918843 534.729 92 99.5 -60 112 Drilled
25GRV03 230590 7918844 533.442 75 82.5 -80 301 Drilled
25GRV04 230674 7918785 533.595 90 97.5 -60 103 Drilled
25GRV05 230697 7918722 531.751 90 97.5 -60 106 Drilled
25GRV06 230683 7918997 531.104 90 97.5 -60 99.6 Drilled
25GRV07 230685 7919024 529.915 90 97.5 -60 120 Drilled
25GRV08 230681 7919022 530.07 49 56.5 -61 127 Drilled
25GRV09 230681 7918939 533.255 102 109.5 -61 92.7 Drilled
25GRV10 230657 7918868 534.63 91 98.5 -61 99.6 Drilled
25GRV11 230536 7918910 532.644 92 99.5 -70 310 Drilled
25GRV12 230543 7918965 531.914 92 99.5 -70 271 Drilled
Greenvale Energy Limited ASX Release
Page | 10
Appendix 2 – 2025 Oasis Drilling Results: Significant Intercepts.
Downhole Spectral Gamma intercepts were generated using a 500ppm eU3O8 lower grade cutoff. Results from holes 25GRV11 and 25GRV12 revealed low-
grade gamma to which the lower grade cutoff of 200ppm eU3O8 was then applied).
Hole ID
Downhole Spectral Gamma Intercepts (500ppm cutoff) Chemical Assay Intercepts
Comments
From
(m)
To (m)
Thickness
(m)
Avg. eU
(ppm)
Avg. eU3O8
(ppm)
From (m) To (m)
Thickness
(m)
Avg. U
(ppm)
Avg. U3O8
(ppm)
25GRV001
40.8 41.3 0.5 2407.63 2839.07 40 41 1 1388.78 1637.65
45 45.1 0.1 1062.14 1252.48 45 46 1 243.85 287.55
46.1 46.4 0.3 1608.48 1896.72 46 47 1 916.53 1080.77
48 48.8 0.8 1669.1 3934.41 48 49 1 786.46 927.39
52.5 52.7 0.2 1222.3 1441.34 52 53 1 553.49 652.68
25GRV002
84.1 85.4 1.3 2218.86 2616.48
84 85 1 2755.39 3249.16
85 86 1 1281.54 1511.19
86 88.6 2.6 2503.02 2951.56
86 87 1 5876.50 6929.57
87 88 1 2785.98 3285.23
25GRV003
279.3 280.1 0.8 1470.59 1734.12
279 284.5 5.5 612.23 721.94
incl. 2m @ 1,188.86ppm U3O8 from 279m; and
0.5m @ 1,838.23ppm U3O8 from 283m
282.7 283.1 0.4 1142.14 1346.81
283.3 283.6 0.3 1280.803 1510.32
25GRV004
63.6 63.7 0.1 1076.08 1268.91
78 78.7 0.7 2944.907 3472.63
76.25 80 3.75 849.08 1001.23
incl. 1m @ 2,423.84ppm U3O8 from 78m; and
0.25m @ 2,729.11ppm U3O8 from 79.5m
78.9 79.1 0.2 1069.53 1261.19
25GRV005 No intervals above 500ppm eU 97.5 98 0.5 161.79 190.78
25GRV006
89.3 89.6 0.3 546.489 644.42
88 91.5 3.5 300.84 354.75
incl. 2m @ 591.90ppm U3O8 from 88.5m; and
1m @ 703.43ppm U3O8 from 89m
90 90.4 0.4 755.2303 890.57
25GRV007 No intervals above 500ppm eU Assays Pending
25GRV008
113.5 114.5 1 1083.31 1277.44 Assays Pending
115 116 1 1364.03 1608.46 Assays Pending
Greenvale Energy Limited ASX Release
Page | 11
117.5 118 0.5 516.5 609.06 Assays Pending
25GRV009 65.5 66.5 1 1175.27 1385.88 Assays Pending
25GRV010 86.5 88 1.5 1208.88 1425.51 Assays Pending
25GRV011
No intervals above 500ppm eU
138.5 139 0.5 351.93 415 200ppm cutoff intercepts (gamma); Assays Pending
25GRV012
No intervals above 500ppm eU
249 250 1 258.65 305 200ppm cutoff intercepts (gamma); Assays Pending
Greenvale Energy Limited ASX Release
Page | 12
Appendix 3
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (e.g. cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the mineralsunder investigation, such as down holegamma sondes,
or handheld XRF instruments, etc). These examples should not be
taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases, more explanation may be required, such
as where there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information.
Drill samples were taken from the core section of diamond drill holes, pre-collared
with Reverse Circulation percussion drilling (RC). Triple tube HQ diamond drilling
was utilised, half core samples were collected on a 1m basis. Samples were
photographed, half-cored, and despatched to an external lab by an external
contractor.
Drilling
techniques
• Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (e.g. core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
9 core holes were drilled at -60°, 2 at 70° and 1 drilled at -80° from surface using
reverse circulation drilling until core point was reached. Then HQ drilling methods
employed, using triple tube chrome barrel and orientation tool. Hole depths ranged
from 66.33m to 309.85m.
Drill sample
recovery
• Method of recording and assessing core and chip sample recoveries
and results assessed.
• Measures taken to maximise sample recovery and ensure
representative nature of the samples.
• Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain
of fine/coarse material.
Chip samples were collected at approximately 1m intervals. All chip samples were
geologically logged and photographed. All drill samples were collected and stored in
sample trays at Terra Search storage facility.
Core recovery was recorded for all drill runs and documented in a Geotechnical log
for each hole. The Triple Tube technology and procedure ensured core recoveries
were excellent throughout the hole. Core was marked up in metre lengths and
reconciled with drillers core blocks. An orientation line was drawn on the core. Core
sampling was undertaken by an experienced operator who ensured that half-core
Greenvale Energy Limited ASX Release
Page | 13
Criteria JORC Code explanation Commentary
was sawn up with one side consistently sent for analysis and the other side was
consistently retained for archive purposes. The orientation line was consistently
preserved.
An unbiased, consistent half-core section was submitted for the entire hole, based
on continuous 1m sampling. The entire half core section was crushed at the lab and
then split, the representative subsample was then finely ground, and a
representative unbiased sample was extracted for further analysis.
Logging • Whether core and chip samples have been geologically and
geotechnically logged to a levelof detail to support appropriate Mineral
Resource estimation, mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
Chip samples were collected every metre, geologically logged and photographed.
All core was collected, measured, geologically logged and photographed.
Geological logging was carried out by well-trained/experienced geologist and data
entered via a well-developed logging system designed to capture descriptive
geology, coded geology and quantifiable geology. All logs were checked for
consistency by the Principal Geologist. Data captured through Excel spread sheets
and Explorer 3 Relational Data Base Management System. A geotechnical log was
prepared.
Logging was qualitative in nature. A detailed log was described based on visual
observations. A comprehensive Core photograph catalogue was completed with full
core dry, full core wet and half core wet photos taken of all cores.
The entire length of all drill holes has been geologically logged.
Drill holes 25GRV01 – 12 were geophysically logged with the following suite of tools
run including Density, Calliper, Verticality/Deviation, Gamma, Spectral Gamma and
ATV Acoustic Scanner. The remaining drill holes will be geophysically logged at the
end of the drill program.
The calibration of the geophysical tools was conducted by the geophysical
logging company engaged in the project at the time.
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
• Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Half-core samples were sawn up on a diamond saw on a metre basis at Terra Search
facility in Townsville, QLD and submitted to Intertek Adelaide for preparation and
analysis.
The above techniques are of a high quality, and appropriate for the nature of
mineralisation anticipated.
Radiometric data is collected every metre of the RC and core holes to be checked
Greenvale Energy Limited ASX Release
Page | 14
Criteria JORC Code explanation Commentary
• Measures taken to ensure that the sampling is representative of the in-
situ material collected, including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the material
being sampled.
and correlated against any lab data for U, Th, K. Similarly portable XRF (PXRF) data is
collected on a 1m basis from RC bulk sample and from 3m drill cuttings (sludge
samples) from the core sections. The latter sampling provides a qualitative check on
U, Th, K contents on a broader 3m scale. In addition, downhole radiometric probe
data has been collected which is providing additional validation of the
appropriateness of sample size.
Trench sampling has been undertaken with the use of a track-mounted excavator to
dig the trenches. The sampling procedure involves the use of a field hammer, PVC
split, plastic sheets and calico bags. The hammer is used to chip samples out of the
trench face, with material falling into the PVC split below. Once the sample has been
collected from the interval, it is bagged into a pre-marked calico bag.
In all sample cases, the standard 2kg -5kg sample is more than appropriate for the
grainsize of the rock-types and the sub-microscopic uranium minerals and sulphide
grainsize. The sample sizes are considered to be appropriate to represent the style
of the mineralisation, the thickness and consistency of the intersections.
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or
total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
• Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (i.e. lack of bias) and precision have been established.
Preparation of rock chip and core samples involves crushing splitting and grinding at
Intertek/Genalysis lab Townsville. Higher grade uranium assays are analysed at
Intertek in Adelaide. The total amount of economic metals and pathfinder elements
tied up in sulphides and oxides such as U,Th,Cu, Pb, Zn, Ag, As, Mo, Bi, S is captured
by the 4-acid digest method ICP finish. Mass spectrometry (MS) ensures low level
detection and REE are also captured. This is regarded as a total digest method and
is checked against QA-QC procedures which also employ these total techniques.
Major elements which are present in silicates, such as K, Ca, Fe, Ti, Al, Mg are also
digested by the 4-acid digest Total method.
The techniques are entirely appropriate for a schistose, micaceous mineralised
structure such as Oasis, hosted in primarily a granitic / metamorphic terrane.
The economically important elements in these deposits are contained in both
resistate minerals and sulphides which are almost entirely liberated by 4 acid digest,
all gold is determined with a classic fire assay. Samples were assayed for gold using
the 50g fire assay method.
Downhole probing was completed by a spectral gamma tool which is a down-hole
logging device that measures natural radiation in the rocks to help identify their
mineral content. By analysing the energy spectrum of gamma rays, the tool can
Greenvale Energy Limited ASX Release
Page | 15
Criteria JORC Code explanation Commentary
distinguish between key elements such as uranium, potassium and thorium, but still
only provides an equivalent uranium value.
This method provides a reliable way to estimate uranium content in drill holes, which
should then be confirmed by chemical assays, and may give early indications of
mineralisation.
Radiometric disequilibrium occurs when the uranium parent isotope is gained or lost
during geological processes, disrupting the balance between parent and daughter
isotopes. Historical work at Oasis indicates this is not a significant issue, with good
correlation reported between chemical and radiometric grades. Recent drilling
results from holes 25GRV01 and 25GRV02 are providing good confirmation that this
is true.
QAQC samples are monitored on a batch‐by‐batch basis, Terra Search has well
established sampling protocols including blanks (both coarse & pulped), certified
reference material (CRM standards) Terra Search quality control included
determinationson certified OREAS samples interspersed at regular intervals through
the sample suite of the commercial laboratory batch.
Standards are checked on receipt of results. Within the drill core results that have
been returned to date are found to be within acceptable tolerances. Laboratory
assay results for these quality control samples are within 5% of accepted values.
Verification of
sampling and
assaying
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
Sample intervals to be assigned a unique sample identification number prior to
sample despatch.
Significant intersections are verified by Terra Search Pty Ltd, independent geological
consultants who geologically supervised the drilling. Validation is checked by
comparing assay results with logged mineralogical intervals that are diagnostic of
the mineralization e.g. chlorite schist, with quartz veins, minor sulphide and
accompanied by high radiometric counts. These intervals have a close correlation
historically with high U grades.
Although holes have not been directly twinned, the holes drilled by GRV to date pass
close enough to earlier drill holes, logged geology and radiometric anomalism is
entirely consistent with previous results. Lab assay results from recent drilling are
awaited.
Greenvale Energy Limited ASX Release
Page | 16
Criteria JORC Code explanation Commentary
Data is collected by qualified geologists and experienced field technicians and
entered into Excel spreadsheets. Data is imported into database tables from the
Excel spreadsheets with validation checks set on different fields. Data is then
checked thoroughly by the Principal Geologist for errors. Accuracy of drilling and
rock chip data is then validated when imported into MapInfo.
Location and analysis data are then collated into a single Excel spreadsheet.
Data is stored on servers in The Company’s office (GRV) and also with Terra Search
Consultants. There are regular backups and archival copies of the database made.
Data is validated by long-standing procedures within Excel Spreadsheets and
Explorer 3 data base and spatially validated within MapInfo GIS.
No adjustments are made to the Commercial lab assay data. Data is imported into
the database in its original raw format.
Location of data
points
• Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations used
in Mineral Resource estimation.
• Specification of
Share your feedback
Discover